Solar Pods

£109 Each

	For above ground and in ground pools Compact size of 580mm x 580mm Coil made of strong polypropylene Dome made of strong transparent polycarbonate Easy connection Connect multiple units for larger pools Works with existing pool pumps (for above water level mounting or long runs, a larger pump may be required) Minimal tools required Tilts to achieve best angle for sun No servicing required
	Kit includes Main base with stand 1.25” to 1.5” hose adaptor Collared tube adaptor Hose clamps Thick connector gasket 1m Hose Side hose connector x2 380mm Hose Clear dome Solar protection cover

Zero Heating costs

Harness the energy from the sun and transfer it to the pool water using “heat trap” glass house effect technology.

Unique design

The compact contemporary design makes the Solar Pod an attractive addition to your garden

For most above ground pools

One Pod is suitable for pools up to 4,500 litres (990 Gallons).  For larger pools simply connect several units in series

Simple to install

Requires only a Philips screwdriver and a silicone lubricant

Virtually maintenance free

Simply wipe the solar pods over with a non abrasive cloth and store in a frost free location for the winter season.

Solar Pods operate by harnessing the free energy from the sun and transferring it into your pool water, it’s “heat trap” technology with glass house effect, captures energy within the ultra clear polycarbonate dome and transfers it to it’s polycarbonate heat exchanger. Solar Pod’s clear dome also reduces heat loss from it’s heat exchanger caused bu wind exposure.

On Solar Pod is ideal for pools up to 4,500 litres (990 Gallons) of water. For larger pools simply install more units in series.

See table below for recommendations.

 In an all day, full sun, sheltered position, or just to take the chill off, fewer pods may be sufficient.

Home   Return to Solar Heating main page

http://www.howardswimmingpools.co.uk  (+44) 01344 873323