Axiom Eco Tub 6

The Axiom Plug n Go Eco Hot Tub is a one piece moulding, providing super strong and rigged construction, as well as being well insulated. The heat recovery technology really works - we have an Eco Tub running in our shop at approximately 38 degrees at all times. The Eco tub is the cheapest tub to run that you can buy. Heat Recovery technology recycles otherwise wasted heat from running the pump, and uses it to warm the water. They are not fitted with heaters, but reaches the same temperature as any other spa at a fraction of the electrical running costs.

	Seats up to 6 people - lounger + 4/5 seats 78" x 78" x 30" 1.5 HP Pump Heat Recovery Technology - 2 day warm up time, then maintains temperature Underwater Light with 3 colours Built in Filtration system Solid Thermal Cover 10 Directional Jets 2 Colours - Sea Spray and Onyx Granite Uses standard 13amp supply
	£2599	£2599

Delivery is included in our price, you will require at least two able bodied people (preferably four) to assist the driver to position the tub at your site. The tub can be transported and manoeuvred into position on it's side. It is about 30" high, so on it' side you will require a clearance access width of at least 32" with a minimum height restriction of 62". Don't forget to allow for twisting and turning and any steps. The tub can be connected using a 13A supply preferably with a RCD safety device fitted (which is a plug in type that can easily be purchased in a supermarket or DIY store).

A virtually indestructible, foam filled, maintenance free shell. A Venturi air system that introduces air into the water to give more invigorating massages.
Heat recovery technology: A simple but very effective and economical way of transferring heat into the water from the pump. This keeps your electric bills very low.

Construction
Unlike most hot tubs that are made from various structures locked together using a main frame and separate shells and side walls, this tub is made from one Roto mould that is then foam filled from underneath to give an extremely strong and durable structure that will last and last and most of all retain the heat!

Power
Require only a standard 13A supply (normal household socket) . A RCD safety circuit breaker is highly recommended. A simple plug in type adaptor is sufficient if your house is not fitted with RCD's.

Filter
25 sq ft filter, which is easily accessible. Filtration also runs during the heating cycles. The spa's electronic thermostat operates the pump, to maintain the desired temperatures. The hot tub's digital control has a pre programmed electronic timer that has been set to automatically run the filtration every hour for a few minutes to filter and heat.

Control panel
Digital electronic control: Factory pre set and programmed. Select the temperature desired and the clock, and forget about it. Filtration and heating cycles are automatic.

Seating
1 Lounger + 3 or 4 seats with varying jets so that you can chose the best seat/jet massage position for you.

Jets
10 Directional Hydro jets are designed to deliver a firm pinpoint jet stream of massaging action to specific areas of the body, such as shoulders and lower back. Move the jet nozzle to direct a flow in and direction. The amount of pressure can be adjusted by rotating the outer rim of the jet.

After the tub is filled, and chemicals added, the only thing you need to do is read the instructions, set the required temperature, and switch it on (you may need to loosen one of the plumbing unions for a few seconds to remove any air locks that may have occurred during transit).

Delivery is normally from stock, however heavy demand can mean that supply varies. We will contact you to advise delivery dates.