Electric Swimming Pool Heaters

Garden Leisure Heaters

Garden Leisure Pool Heaters

Manufactured by the same company that makes Quick up and Frame Set pools, especially designed for ease of use. These pool heaters just fit in the water pipes outside the pool and warm the water that returns to the pool. The 3kw heater is suitable for pools up to 12' diameter or approximately 2,000 gallons. They can be plugged in using an extension lead or other 13amp cable via a 13amp plug. All heaters are thematically controlled and will switch off once the desired temperature has been reached, and therefore don't consume a continuous 3kw once the pool is heated. For larger pools - 15' diameter & 18' diameter, a 5kw heater is recommended, although this will have to be connected by an electrician. The 3kw heater on a 15' pool will serve to take the chill off only. It has been known to use two 3kw heaters using two separate extension leads to avoid the need for an electrician.

Garden Leisure offer a fantastic guarantee with this product, simply return a small part (the white end cap as proof of purchase) in a Jiffy bag, along with a copy of your receipt to a UK helpline address, and a complete new heater will be sent to you. You can then dispose of the faulty unit at your leisure.  

Minimum flow rate requirements is 1800 litres / hour (400 gals / hour)

Orders over £150 - free delivery (unless otherwise stated), complete orders under £150, £10 carriage.

3KW Garden Leisure  Add to cart £69
5KW Garden Leisure Add to cart £149

NEW Garden Leisure Pump / Filter / Heater Combination - 3KW

GLP Pump / Filter / Heater Combination

Garden Leisure Pump / Filter / 3KW Heater combination

Add to cart  £137


NEW Intex Heaters

Intex Swimming Pool Heater

New Intex 3KW pool heater with built in water level sensor to prevent burning. Standard 1¼" pipe fittings

Minimum flow rate requirements is 1800 litres / hour (400 gals / hour)

Add to cart £89

Add to cart £79  (when purchased with a pool)


Intex Sand Filter New product for 2008 - Intex Pump / Sand Filter combination with ½ HP self-priming pump. This product has the facility to add a 3KW heater and / or a UV steriliser as part of the integral unit. Includes fittings for Intex pools.

Add to cart  Pump / Filter £275 (does not include sand filter media)

Add to cart  3KW Heater £210 (only for use with this unit)

Add to cart UV Steriliser £159 (only for use with this unit)


Elecro Heaters

Elecro Heaters 

Manufactured in the UK, these Elecro stainless steel heaters offer the rugged high quality from this well known brand. Suitable for use with all above ground, and in ground pools. We stock the stainless steel version but the titanium version (for use with salt water pools) is also available. Timer clocks can be added by special order, but it is worth remembering that these heaters will turn themselves off using their internal flow rate sensor switch, therefore if the pump is plugged in via a simple timer, the heater will go off at the same time as the pump does. They are fitted externally in the plumbing between the filter and the return pipe to the pool. 

  Stainless Steel Titanium (for salt water applications)
3KW Plug & Play Above Ground Elecro Add to cart £239 -
3KW Elecro -  Add to cart £445
6KW Elecro  Add to cart £378 Add to cart £511
9KW Elecro Add to cart £479 Add to cart £594
12KW Elecro Add to cart £569 Add to cart £685
15KW Elecro Add to cart £599 Add to cart £799

 

Home   Heating Main Page

 

http://www.howardswimmingpools.co.uk  (+44) 01344 873323