The Quest Spa

The Quest Plug-n-go Spa makes an excellent addition to our range of low power consumption hot tubs, and running from a standard 13 amp plug means no special wiring is required. As the name suggests, fill it up, plug it in, and off you go!

Luxury 4 seater spa (although not officially a lounger tub, it can be seen from the top view that it's easily possible to sit sideways across two seats).
74” x 64” x 30”
12 Jets - various
3KW Heater
2HP Pump – 2 speed
Lucite acrylic top – Caribbean Blue
Excel Plus Redwood Cabinet
Perma-shield base
2 x headrests
13amp supply required
Mood light ( 3 lens )
Matching Thermal Cover

Delivery is included in our price, you will require two able bodied people to assist the driver to position the tub at your site. The tub can be transported and manoeuvred into position on it's side. It is about 30" high, so on it' side you will require a clearance access width of at least 32" with a minimum height restriction of 76". Don't forget to allow for twisting and turning and any steps. The tub can be connected using a 13A supply preferably with a RCD safety device fitted (which is a plug in type that can easily be purchased in a supermarket or DIY store).

After the tub is filled, and chemicals added, the only thing you need to do is read the instructions, set the required temperature, and switch it on (you may need to loosen one of the plumbing unions for a few seconds to remove any air locks that may have occurred during transit).

A Deluxe lounger / 4 seater spa-Ideal for a small family. The seating area is sculptured in such a way to allow lounging or seats.

A venturi air system that introduces air into the water jets to give a more invigorating massage.

The cabinet is made from Excel Plus Redwood panelling. The shell is acrylic from Lucite XL. The material used in the construction of your hot tub is similar to that used in auto and aerospace industries. Fiberlite™, another exclusive Vita Spa product, consists of lightweight, fire retardant fillers and a modified polyester resin which combine to create a practically unbreakable bond in acrylic surfaces. Our PermaShield™ base adds an attractive touch to your hot tub while it also isolates the hot tub from the ground or deck.

In addition to the value of insulating the elements of cold and rain from your hot tub, the PermaShield base will not harm or stain your deck or patio. It also blocks entry or rodents that seek refuge in the warmth of your spa cabinet. Heavy duty frame made using only pressure treated wood

Requires only a standard 13 amp supply ( normal household socket ). RCD breaker protection is highly recommended ( some newer houses have this protection built in or a simple RCD adapter can be used )

25 sq.ft. filter which is easily accessible. Filtration also runs during the heating cycles- the spa's electronic thermostat starts the low speed pump and the heater to maintain the desired temperature. The hot tub's digital control has a pre-programmed electronic timer that has been set to automatically run the filtration low speed pump for 2 hours twice a day, from 8 a.m. to 10 a.m., and from 4 p.m. to 6 p.m.

Digital LED control. Factory preset and programmed. Select the temperature desired and the clock and forget about it. Filtration and heating cycles are all preset.

12 Jets in total. 3 Mini Jets, 2 foot jets & 7 Directional Hydro jets are designed to deliver a firm pinpoint jet stream of massaging action to specific areas of your body, such as shoulders and lower back. Move the jet nozzle to direct the flow in any direction. The amount of pressure can be adjusted by rotating the outer rim of the jet: clockwise for lower pressure and counter clockwise for higher pressure.

Delivery is normally from stock, however heavy demand can mean that supply varies.